Dell 9.7(0.0) manual Ip domain-name, Information Example

Usage	Use this command to associate name server IP addresses to a specific VRF.
Information
Example	•	Dell(conf)#ip name-server vrf jay 2.2.2.2
	•	Dell(conf)#ip name-server vrf jay 2.2.2.2 3.3.3.3 4.4.4.4
	5.5.5.5		6.6.6.6 7.7.7.7

ip domain-name

Configures the default domain corresponding to a specific VRF. This domain is appended to the in complete DNS requests corresponding to the specified VRF.

Syntax ip domain-name [vrf vrf-name] name

Parameters

Defaults

Command Modes

Command History

Usage Information

Example

To undo the domain name configuration corresponding to a specific VRF, use the no ip domain-name [vrf vrf-name]name command.

vrf vrf-name	(Optional) Enter the key word vrf and then the name of the
	VRF to configure the domain corresponding to that VRF.
name	Enter the name of the domain to be appended to the in
	complete DNS requests corresponding to the specified VRF.
None
EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Introduced on the S-Series and Z-Series.

Use this command to configure a domain name corresponding to a VRF. This domain is appended to the in complete DNS requests corresponding to the specified VRF.

Dell(conf)#ip domain-name vrf jay dell.com

Dynamic Host Configuration Protocol (DHCP) 579