Dell 9.7(0.0) manual Interface management, Maximum dynamic-routes

Command History

Related Commands

Version	Description
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, S6000–
	ON, and Z9500.

ip route-import – imports routes from another VRF.

interface management

Associates a management port with a management VRF.

Syntax interface management

Defaults

Command Modes

Command History

Usage Information

To delete the association between a management port and a management VRF, use the no interface management command.

None.

VRF MODE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.
9.4.(0.0)	Introduced on the S-Series and Z9000.

Use this command to associate a management port with a management VRF. When you execute this command, the management ports corresponding to both the ACTIVE unit as well as the STANDBY unit are associated with the management VRF.

maximum dynamic-routes

Specify the maximum number of dynamic (protocol) routes a VRF can have.

Syntax	maximum dynamic-routes limit {warn-thresholdthreshold-value
	warning-only}

1616 Virtual Routing and Forwarding (VRF)