load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.

Syntax[no] load-balance hg {ip-selection ipv6-selection [source-ip source-ipv6 source-port-id source-module-id dest-ip dest-ipv6 dest-port-id dest-module-id protocol vlan L4-source-port L4-dest-port] mac [source-mac source- port-id source-module-id dest-mac dest-port-id dest- module-id vlan ethertype source-dest-mac] tunnel [ipv4-over-ipv4 ipv4-over-gre-ipv4 mac-in-mac]}

Parameters

{{ip-selection ipv6-selection [source-ip source-ipv6 source-port-id source- module-id dest-ip dest- ipv6 dest- port-id dest- module-id protocol vlan L4-source-port L4-dest-port]

To use IPv4 key fields in hash computation, enter the keyword ip-selectionthen one of the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-selectionthen one of the parameters.

•source-ip — Use IPv4 src-ip field in hash calculation.

•source-ipv6 — Use IPv6 src-ip field in hash calculation

•source-port-id — Use src-port-id field in hash calculation.

•source-module-id — Use src-module-id field in hash calculation.

•dest-ip — Use IPv4 dest-ip field in hash calculation.

•dest-ipv6 — Use IPv6 dest-ip field in hash calculation

•dest-port-id — Use dest-port-id field in hash calculation.

•dest-module-id — Use dest-module-id field in hash calculation.

•protocol — Use IPv4 protocol field in hash calculation.

•vlan — Use vlan field in hash calculation.

•L4-source-port — Use IPv4 L4-source-port field in hash calculation.

•L4-dest-port — Use IPv4 L4-dest-port field in hash calculation.

mac [source- mac source- port-id source- module-id dest-mac dest-port-id dest-module- id vlan ethertype source-dest- mac ]

To use MAC key fields in hash computation, enter the keyword mac then one of the parameters:

•source-mac — Use source-mac field in hash calculation.

•source-port-id — Use src-port-id field in hash calculation.

•source-module-id — Use src-module-id field in hash calculation.

•dest-mac — Use dest-mac field in hash calculation.

•dest-port-id — Use dest-port-id field in hash calculation.

•dest-module-id — Use dest-module-id field in hash calculation.

•vlan — Use vlan field in hash calculation .

IPv4 Routing

783

Page 783
Image 783
Dell 9.7(0.0) manual Load-balance hg