Dell 9.7(0.0) manual Default-information originate, Always, Metric metric

Command Modes

Command History

•For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.2(0.2)	Introduced on the Z9000.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

6.3.1.0Introduced.

default-information originate

Generates a default route into an IS-IS routing domain and controls the distribution of default information.

Syntaxdefault-information originate [always] [metric metric] [route-

map map-name]

Parameters

Defaults

Command Modes

To disable the generation of a default route into the specified IS-IS routing domain, use the no default-information originate [always] [metric metric] [route-mapmap-name]command.

always	(OPTIONAL) Enter the keyword always to have the default
	route always advertised.
metric metric	(OPTIONAL) Enter the keyword metric then a number to
	assign to the route. The range is from 0 to 16777215.
route-map	(OPTIONAL) A default route the routing process generates if
map-name	the route map is satisfied.
Not configured.

•ROUTER ISIS (for IPv4)

•CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Intermediate System to Intermediate System (IS-IS) 851