Dell 9.7(0.0) manual Service-policy rate-limit-protocols, Policy-name

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

policy-name	Enter the service-policy name, using a string up to 32
	characters.

Not configured.

CONTROL-PLANE-CPUQOS

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.8.0Introduced on the S4810.

Create a policy-map by associating a queue number with the qos-policy.

Create QoS policies prior to enabling this command.

For CoPP, use the keyword cpu-qoswhen creating qos-policy-input.

qos-policy-input — creates a QoS input policy map.

policy-map-input — creates an input policy map.

service-policy rate-limit-protocols

Apply a policy for the system to rate limit control protocols on a per-protocol basis.

S6000

Syntax	service-policy rate-limit-protocols policy-name
Parameters	policy-name	Enter the service-policy name, using a string up to 32
		characters.
Defaults	Not configured.

472 Control Plane Policing (CoPP)