Dell 9.7(0.0) manual Show ip vrf vrf-name

Parameters

Defaults

Command Modes

Command History

Usage Information

To remove the limit on the maximum number of routes used, use the no maximum dynamic-routescommand.

limit	Maximum number of routes allowed in a VRF. Valid range is
	from 1 to 16,000 (or maximum allowable for that platform if
	smaller value).
warning-	Warning threshold value is expressed as a percentage of the
threshold	limit value. When the number of routes reaches the specified
	percentage of the limit, a warning message is generated.
	Valid range is 1 to 100. When warn-threshold is used, once
	the limit is reached, additional dynamic routes will not be
	allowed.
warning-only	When the warning-only option is used, a syslog message will
	be thrown when maximum number of dynamic routes
	reaches the limit. Additional dynamic routes will still allowed.

No limit is set on the maximum number of dynamic routes for a VRF.

CONFIGURATION-VRF

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OSCommand Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON and Z9500.
9.4(0.0)	Introduced on the S–Series.

If the maximum route limit is not specified for a VRF, then it has unlimited space that extends to the maximum number of entries allowed for the system. This command is not applicable to the default and management VRFs.

show ip vrf

Displays information corresponding to the VRFs that are configured in the system.

Syntax	show ip [vrf vrf-name]
Parameters	vrf vrf-name	Enter the keyword vrf and then the name of the VRF to

display information corresponding to that VRF..

Virtual Routing and Forwarding (VRF) 1617