Dell 9.7(0.0) manual Resequence access-list, Ipv4 mac

permit tcp — assigns a permit filter for TCP packets.

resequence access-list

Re-assign sequence numbers to entries of an existing access-list.

Syntax

Parameters

Defaults

Command Modes

Command History

Usage Information

resequence access-list {ipv4 mac} {access-list-name StartingSeqNum Step-to-Increment}

ipv4 mac	Enter the keyword ipv4or mac to identify the access list type
	to resequence.
access-list-	Enter the name of a configured IP access list, up to 140
name	characters.
StartingSeqNu	Enter the starting sequence number to resequence. The
m	range is from 0 to 4294967290.
Step-to-	Enter the step to increment the sequence number. The
Increment	range is from 1 to 4294967290.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale (IPv4).

7.8.1.0Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

When all sequence numbers are exhausted, this feature permits re-assigning a new sequence number to entries of an existing access-list.

Access Control Lists (ACL) 217