Dell 9.7(0.0) manual Mhmac, Pport

"no fips mode enable"(disable) will support v1 & v2 client. This comment is applicable for both ciphers & HMAC algorithms:

• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.

• aes128-cbc : Force ssh to use aes128-cbc encryption cipher

• aes192-cbc : Force ssh to use aes192-cbc encryption cipher

• aes256-cbc : Force ssh to use aes256-cbc encryption cipher

• aes128-ctr : Force ssh to use aes128-ctr encryption

			cipher
		• aes192-ctr : Force ssh to use aes192-ctr encryption
			cipher
		• aes256-ctr : Force ssh to use aes256-ctr encryption
			cipher
	-lusername	(OPTIONAL) Enter the keyword -lthen the user name used
		in this SSH session. The default is the user name of the user
		associated with the terminal.
	-mHMAC	Enter one of the following HMAC algorithms to use. (For v2
	algorithm	clients only):
		"no fips mode enable"(disable) will support v1 & v2 client.
		• hmac-md5: Force ssh to use hmac-md5 HMAC algorithm.
		• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC
			algorithm.
		• hmac-sha1: Force ssh to use hmac-sha1 HMAC
			algorithm.
		•	hmac-sha1-96 : Force ssh to use hmac-sha1-96 HMAC
			algorithm.
		•	hmac-sha2-256 : Force ssh to use hmac-sha2-256
			HMAC algorithm.
		• hmac-sha2-256-96: Force ssh to use hmac-
			sha2-256-96 HMAC algorithm.
	-pport-	(OPTIONAL) Enter the keyword -pthen the port number.
	number	The range is from 1 to 65535. The default is 22.
	-v {1 2}	(OPTIONAL) Enter the keyword -vthen the SSH version 1 or
		2. The default is the version from the protocol negotiation.
Defaults	As shown in the Parameters section.
Command	EXEC Privilege
Modes

Security 1443