match mac vlan

Configure a match criterion for a class map based on VLAN ID.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

match mac vlan number

number

Enter the VLAN ID. The range is from 1 to 4094.

none

CLASS-MAP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced.

Usage

To access this command, enter the class-mapcommand. You can match against

Information

only one VLAN ID.

Related

class-map — identifies the class map.

Commands

 

policy-aggregate

Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (output) applied on an interface.

S6000

Syntax

policy-aggregate qos-policy-name

 

To remove a policy aggregate configuration, use the no policy-aggregate

 

qos-policy-name command.

Parameters

qos-policy-

Enter the name of the policy map in character format (32

 

 

name

characters maximum).

1264

Quality of Service (QoS)

Page 1264
Image 1264
Dell 9.7(0.0) manual Match mac vlan, Policy-aggregate, Number Enter the Vlan ID. The range is from 1 to, Qos-policy