Dell 9.7(0.0) manual Excluded, Snmp-server vrf vrf-name, Associate an Snmp agent with that VRF

Defaults

Command Modes

Command History

Usage Information

Example

Related Commands

included	(OPTIONAL) Enter the keyword included to include the MIB
	family in the view.
excluded	(OPTIONAL) Enter the keyword excluded to exclude the
	MIB family in the view.
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

The oid-treevariable is a full sub-tree starting from 1.3.6 and cannot specify the name of a sub-tree or a MIB. The following Example configures a view named rview that allows access to all objects under 1.3.6.1.

Dell# conf

Dell#(conf) snmp-server view rview 1.3.6.1 included

show running-config snmp — displays the SNMP running configuration.

snmp-server vrf

Configures an SNMP agent to bind to a specific VRF.

Syntax	snmp-server vrf vrf-name
	To undo the SNMP agent configuration, use the no snmp-server vrf vrf-
	name command.

Parameters	vrf vrf-name	Enter the keyword vrf and then the name of the VRF to
		associate an SNMP agent with that VRF.

Simple Network Management Protocol (SNMP) and Syslog 1499