Dell 9.7(0.0) manual Enable secret, Syntaxenable secret level level encryption-typepassword

enable secret

Change the password for the enable command.

Syntaxenable secret [level level] [encryption-type]password

To delete a password, use the no enable secret [encryption-type]password [level level] command.

Parameters

level level

encryption- type

password

(OPTIONAL) Enter the keyword level then a number as the level of access. The range is from 1 to 15.

(OPTIONAL) Enter the number 5 or 0 as the encryption type.

Enter a 5 then a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router.

Use this parameter only with a password that you copied from the show running-configfile of another Dell Networking router.

Enter a text string, up to 32 characters long, as the clear text password.

Defaults

Command Modes

Command History

No password is configured. level = 15.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

1380 Security