Dell 9.7(0.0) manual Command Modes Flap-statistics Routes, Command History

Command Modes

flap-statistics

routes

received- routes [network [network-mask]

denied-routes [network [network-mask]

•EXEC

•EXEC Privilege

(OPTIONAL) Enter the keywords flap-statisticsto view flap statistics on the neighbor’s routes.

(OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible routes.

(OPTIONAL) Enter the keywords received-routesthen either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information received from neighbors.

NOTE: Configure the neighbor soft- reconfiguration inbound command prior to viewing all the information received from the neighbors.

(OPTIONAL) Enter the keywords denied-routesthen either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information on routes denied via neighbor inbound filters.

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.8.0Added the add-pathoption to the S4810. Output on the S4810 shows the ADDPATH parameters.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

7.5.1.0Added the detail option. Output now displays the default MED value.

7.2.1.0Added the received and denied route options.

6.3.10The output is changed to display the total number of advertised prefixes.

438 Border Gateway Protocol