Defaults

Command Modes

Command History

Usage Information

Related Commands

none

INTERFACE VLAN

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series and S-Series.

The list of secondary VLANs can be:

•Specified in comma-delimited or hyphenated-range format.

•Specified with this command even before they have been created.

•Amended by specifying the new secondary VLAN to be added to the list.

private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.

switchport mode private-vlan — sets PVLAN mode of the selected port.

switchport mode private-vlan

Set PVLAN mode of the selected port.

S6000

Syntax[no] switchport mode private-vlan {host promiscuous trunk}

To remove PVLAN mode from the selected port, use the no switchport mode private-vlancommand.

Parameters

host

Enter the keyword host to configure the selected port or

 

 

 

port channel as an isolated interface in a PVLAN.

 

promiscuous

Enter the keyword promiscuous to configure the selected

 

 

port or port channel as an promiscuous interface.

1226

Private VLAN (PVLAN)

Page 1226
Image 1226
Dell 9.7(0.0) manual Switchport mode private-vlan, Parameters Host, Promiscuous