Dell 9.7(0.0) manual Show spanning-tree pvst vlan vlan-id brief guard

Usage	After you enable PVST+, the device runs an STP instance for each VLAN it supports.
Information
Related	disable — disables PVST+.
Commands
	show spanning-tree pvst — displays the PVST+ configuration.

show spanning-tree pvst

View the Per-VLAN spanning tree configuration.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

show spanning-tree pvst [vlan vlan-id] [brief] [guard]

vlan vlan-id	(OPTIONAL) Enter the keyword vlan then the VLAN ID. The
	range is 1 to 4094.
brief	(OPTIONAL) Enter the keyword brief to view a synopsis of
	the PVST+ configuration information.
interface	(OPTIONAL) Enter one of the interface keywords along with
	the slot/port information:
	• For a Port Channel interface, enter the keyword port-
	channel then a number: The range is 1 to 128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
guard	(OPTIONAL) Enter the keyword guard to display the type of
	guard enabled on a PVST interface and the current port state.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

1232 Per-VLAN Spanning Tree Plus (PVST+)