Command History

Usage Information

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.16.0Introduced on the MXL 10/40GbE Switch IO Module. This command is available at the global level only.

iscsi priority-bits

Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.

Syntax

iscsi priority-bits priority-bitmap

Parameters

Defaults

Command Modes

Command History

Usage Information

To remove the configured iSCSI priority, use the no iscsi priority-bitscommand.

priority-bitmapEnter the priority-bitmap range. The range is from 1 to FF.

0x10

PROTOCOL LLDP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.16.0Introduced on the MXL 10/40GbE Switch IO Module. This command is available at the global level only.

496

Data Center Bridging (DCB)

Page 496
Image 496
Dell 9.7(0.0) manual Iscsi priority-bits priority-bitmap