Dell 9.7(0.0) manual Neighbor default-originate, Route-map

neighbor default-originate

Inject the default route to a BGP peer or neighbor.

S6000

Syntaxneighbor {ip-address peer-group-name} default-originate [route-map map-name]

Parameters

Defaults

Command Modes

Command History

Usage Information

To remove a default route, use the no neighbor {ip-addresspeer- group-name}default-originatecommand.

ip-address	(OPTIONAL) Enter the IP address of the neighbor in dotted
	decimal format.
peer-group-	Enter the name of the peer group to set the default route of
name	all routers in that peer group.
route-map	(OPTIONAL) Enter the keyword route-mapthen the name
map-name	of a configured route map.
Not configured.
ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

If you apply a route map to a BGP peer or neighbor with the neighbor default- originate command configured, the software does not apply the set filters in the route map to that BGP peer or neighbor.

When you configure a route-map for a BGP peer or peer group with the neighbor default-originatecommand, the command checks for the existence of the route in BGP RIB.

384 Border Gateway Protocol