arp timeout
Set the time interval for an ARP entry to remain in the ARP cache.
S6000
Syntax arp timeout minutes
Parameters minutes Enter the number of minutes. The range is from 0 to 35790.
The default is 240 minutes.
Defaults 240 minutes (4 hours)
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Related
Commands
show interfaces — displays the ARP timeout value for all available interfaces.
clear arp-cache
Clear the dynamic ARP entries from a specific interface or optionally delete (no-refresh) ARP entries
from the content addressable memory (CAM).
S6000
Syntax clear arp-cache [vrf vrf-name | interface | ip ip-address] [no-
refresh]
IPv4 Routing 747