Dell 9.7(0.0) manual Ignore-lsp-errors, Ip router isis tag

ignore-lsp-errors

Ignore LSPs with bad checksums instead of purging those LSPs.

Syntax

Defaults

Command Modes

Command History

ignore-lsp-errors

To return to the default values, use the no ignore-lsp-errorscommand.

In IS-IS, the default deletes LSPs with internal checksum errors (no ignore-lsp- errors).

ROUTER ISIS

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Usage	IS-IS normally purges LSPs with an incorrect data link checksum causing the LSP
Information	source to regenerate the message. A cycle of purging and regenerating LSPs can
	occur when a network link continues to deliver accurate LSPs even though there is
	a link causing data corruption. This process could cause disruption to your system
	operation.

ip router isis

Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.

Syntax	ip router isis [tag]
	To disable IS-IS on an interface, use the no ip router isis [tag] command.
Parameters	tag	(OPTIONAL) The tag you specify identifies a specific area

routing process. If you do not specify a tag, a null tag is assigned.

Intermediate System to Intermediate System (IS-IS) 865