Dell 9.7(0.0) manual Show frrp ring-idsummary summary

Usage	This command places you into the resilient ring protocol. After executing this
Information	command, the command line prompt changes to conf-frrp.

show frrp

Display the resilient ring protocol configuration.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

show frrp [ring-id[summary]] [summary]

ring-id	Enter the ring identification number. The range is from 1 to
	255
summary	(OPTIONAL) Enter the keyword summary to view just a
	summarized version of the Ring configuration.
none
EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series.

7.4.1.0Introduced.

Usage	Executing this command without the optional ring-idcommand clears the
Information	statistics counters on all the available rings. Dell Networking OS requires a
	command line confirmation before the command executes. This command clears
	the following counters:
	• hello Rx and Tx counters
	• Topology change Rx and Tx counters
	• The number of state change counters

620 Force10 Resilient Ring Protocol (FRRP)