Dell 9.7(0.0) Added the database-timer rate-limit option for the S4810, Field Description 814

Command Modes

Command History

Usage Information

database-timer(OPTIONAL) Enter the keywords database-timer rate-

rate-limitlimit to display the LSA throttling timer information. This applies to the S4810 platform only.

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.4(0.0)	Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.8.0Added the database-timer rate-limit option for the S4810.

8.3.7.0Introduced on the S4810.

7.8.1.0Added support for the Multi-Process OSPF.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

The following describes the debug ip ospf command shown in the Example below.

Field	Description
8:14	Displays the time stamp.
OSPF	Displays the OSPF process ID: instance ID.
v:	Displays the OSPF version. Dell Networking OS supports
	version 2 only.
t:	Displays the type of packet sent:
	•	1 - Hello packet
	•	2	- database description
	•	3	- link state request
	• 4 - link state update
	•	5	- link state acknowledgement
l:	Displays the packet length.

Open Shortest Path First (OSPFv2 and OSPFv3) 1067