Dell 9.7(0.0) manual Cam-acl default l2acl 1-10ipv4acl 1-10ipv6acl 0-10ipv4qos, Ipv4acl, L2qos

l2acl	Set L2-ACL entries
Dell(conf)#cam-acl-egress l2acl ?
<1-4>	Number of FP blocks for l2acl
Dell(conf)#cam-acl-egress l2acl 1		?
ipv4acl	Set IPV4-ACL entries	ipv4acl	1	?
Dell(conf)#cam-acl-egress l2acl 1
ipv6acl	Set IPV6-ACL entries	ipv4acl	1	ipv6acl ?
Dell(conf)#cam-acl-egress l2acl 1
<0-4>	Number of FP blocks for IPV6		(multiples of 2)
Dell(conf)#cam-acl-egress l2acl 1		ipv4acl	1	ipv6acl 2

cam-acl

Allocate space for IPv6 ACLs.

S6000

Syntax

Parameters

Command Modes

Command History

cam-acl {default l2acl 1-10ipv4acl 1-10ipv6acl 0-10ipv4qos

1-10 l2qos 1-10}

default	Use the default CAM profile settings, and set the CAM as
	follows:
	• L3	ACL (ipv4acl): 6
	• L2	ACL(l2acl): 5
	• IPv6 L3 ACL (ipv6acl): 0
	• L3	QoS (ipv4qos): 1
	• L2	QoS (l2qos): 1
l2acl 1-10	Allocate space to support IPv6 ACLs. Enter all of the profiles
ipv4acl 1-10	and a range. Enter the CAM profile name then the amount to
ipv6acl 0-10	be allotted. The total space allocated must equal 13. The
ipv4qos 1-10	ipv6acl range must be a factor of 2.
l2qos 1-10

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

838 IPv6 Access Control Lists (IPv6 ACLs)