Dell 9.7(0.0) manual Other-config-flag on off, Reachable-time value

Related Commands

•ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and enter the RA guard policy configuration mode.

other-config-flag

Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification process is bypassed.

Syntax other-config-flag {on off}

Parameters

Defaults

Command

Modes

Command

History

Related Commands

To reset the other configuration parameter, use the no other-config-flag {on off} command.

on	Enter the keyword on to set the other-config-flag value as
	ON.
off	Enter the keyword off to set the other-config flag value as
	OFF.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

•ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the router advertisement (RA) guard policy name and enter the RA guard policy configuration mode.

reachable-time

Enable the verification of the configured reachability time in the received RA packets.

Syntax	reachable—time value
	To reset the advertised reachability time, use the no reachable-timevalue
	command.

Neighbor Discovery Protocol (NDP) 1031