hg-seed seed- value stack- unit

lag hash algorithm

nh-ecmp hashalgorithm value

stack-unit

number

ip-sa-mask value

ip-da-mask value

Enter the keywords port-setport-pipethen the port pipe number. The range is from 0 to 5.

Z-Series only: Enter the keywords hg-seedthen the hash algorithm seed value. The range is from 0 to 2147483646.

Enter the keywords stack-unitthen the stack unit number.

Enter the keywords port-setthen the stack-unit port-pipe number.

Z-Series only: Enter the keywords hg-seed . The range is from 0 to 47.

(OPTIONAL) Enter the keyword nh-ecmp followed by the ECMP hash algorithm value.

(OPTIONAL) : Enter the keywordstack—unit followed by the stack—unit slot number.

(OPTIONAL) Enter the keyword ip-sa-mask followed by the ECMP/LAG hash mask value. The range is from 0 to FF.

(OPTIONAL) Enter the keyword ip-da-mask followed by the ECMP/LAG hash mask value. The range is from 0 to FF.

Defaults

Command Modes

Command History

IPSA and IPDA mask value is FF for the stack-unit.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.10.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Added the nh-ecmpoption.

586

Equal Cost Multi-Path (ECMP)

Page 586
Image 586
Dell 9.7(0.0) manual Hg-seed seed- value stack- unit, Lag hash algorithm