Dell 9.7(0.0) manual Neighbor remove-private-as

Related Commands

This command automatically restarts the neighbor session for the configuration to take effect.

router bgp — enters ROUTER BGP mode and configures routes in an AS. bgp four-octet-as-support — enables 4-byte support for the BGP process.

neighbor remove-private-as

Remove private AS numbers from the AS-PATH of outgoing updates.

S6000

Syntaxneighbor {ip-address peer-group-name} remove-private-as

Parameters

Defaults

Command Modes

Command History

Usage Information

To return to the default, use the no neighbor {ip-addresspeer-group- name} remove-private-ascommand.

ip-address	Enter the IP address of the neighbor to remove the private AS
	numbers.
peer-group-	Enter the name of the peer group to remove the private AS
name	numbers.

Disabled (that is, private AS number are not removed).

ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series. Added 4-byte support.

Applies to EBGP neighbors only.

Configure your system to accept 4-byte formats before entering a 4 byte AS Number.

398 Border Gateway Protocol