Dell 9.7(0.0) manual Enter the keyword connected to specify that information

•If passive-interface default is specified, then save no passive- interface interface into the running configuration.

No passive-interface default

•Clear everything and revert to the default behavior.

•All previously marked passive interfaces are removed.

•May update ABR status.

On configuring suppression using the passive-interface command, the state of the OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer expires.

redistribute

Redistribute information from another routing protocol throughout the OSPF process.

S6000

Syntaxredistribute {connected isis ospf rip static} [metric metric-value metric-type type-value] [route-map map-name] [tag tag-value]

To disable redistribution, use the no redistribute {connected isis rip static} command.

Parameters	Enter the keyword connected to specify that information
connected
	from active routes on interfaces is redistributed.
isis	Enter the keyword isis to specify that ISO IS-IS information is
	redistributed.
ospf	Enter the keyword ospf to specify that information
	corresponding to OSPF is redistributes.
rip	Enter the keyword rip to specify that RIP routing
	information is redistributed.
static	Enter the keyword static to specify that information from
	static routes is redistributed.
metric metric-	(OPTIONAL) Enter the keyword metric then a number. The
value	range is from 0 (zero) to 16777214.
metric-type	(OPTIONAL) Enter the keywords metric-typethen one of
type-value	the following:
	• 1 = OSPF External type 1
	• 2 = OSPF External type 2
route-map	(OPTIONAL) Enter the keywords route-mapthen the name
map-name	of the route map.

Open Shortest Path First (OSPFv2 and OSPFv3) 1097