Dell 9.7(0.0) manual No stack-unit unit-idstack-group stack-group-id, Unit-id, Stack-group-id

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.11.1Introduced on the Z9000.

8.2.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the C-Series and S-Series.

Usage	You must enable the stackable VLAN (using the vlan-stack compatible
Information	command) on the VLAN prior to adding a member to the VLAN.
Related	vlan-stack compatible — enables stackable VLAN on a VLAN.
Commands

stack-unit stack-group

Configure a stacking group specified by an ID.

Syntax

Parameters

Command Modes

Command History

[no] stack-unit unit-idstack-group stack-group-id

unit-id	Enter the stack unit ID.
stack-group-id	Enter the stack group ID. The range is from 0 to 16.
[no]	Use no stack-unit unit-id stack-group stack-id
	to remove the current stack group configuration.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.10.2Introduced on the S4810.

VLAN Stacking 1599