Dell 9.7(0.0) manual Ipv6 neighbor, Ipv6 nd ra-guard policy policy-name

Defaults

Command

Modes

Command

History

Disabled

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

ipv6 nd ra-guard policy

Define the RA guard policy name and enter the RA guard policy list configuration mode.

Syntax	ipv6 nd ra-guard policy policy-name
Parameters	policy policy-	Enter the keyword policy then the policy-name. The policy
	name	name allows a maximum of 140 characters.

Defaults

Command

Modes

Command

History

Related Commands

none

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

ipv6 neighbor

Configure a static entry in the IPv6 neighbor discovery.

S6000

Syntaxipv6 neighbor [vrf vrf-name] {ipv6-address} {interface

interface} {hardware_address}

1026 Neighbor Discovery Protocol (NDP)