Dell 9.7(0.0) - page 1615

static Enter the keyword static to leak or share static routes

corresponding to the VRF.

Defaults N/A

Command

Modes

ROUTE MAP MODE

Command

History Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, and Z9500.

Usage

Information You can specify the matching criteria only after defining a route-map. Before using

this command, you must enter the route map mode using the route-map route-

map-name command. The match criteria that you specify is associated with the

route-map that you define.

The export-target and import-target support only the match protocol and match

prefix-list options. Other options that are configured in the route-maps are

ignored.

Commands

ipv6 route-import – imports IPv6 routes from another VRF.

redistribute

Redistributes leaked or exported routes corresponding to specific protocols.

Syntax redistribute {imported-bgp | import-ospf | import-isis}

Parameters imported-bgp Enter the keyword imported-bgp to redistribute leaked

routes that are learnt using the BGP protocol.

imported-ospf Enter the keyword imported-ospf to redistribute leaked

routes that are learnt using the OSPF protocol.

imported-isis Enter the keyword imported-isis to redistribute leaked routes

that are learnt using the ISIS protocol.

route-map Enter the name of the route-map to specify the filtering

criteria for imported routes.

Defaults N/A

Command

Modes CONFIGURATION

Virtual Routing and Forwarding (VRF) 1615