Dell 9.7(0.0) manual Ipv6 dhcp snooping verify mac-address, Ip helper-address

ipv6 dhcp snooping verify mac-address

Configure to enable verify source mac-address against ipv6 DHCP packet mac address.

Syntax [no] ipv6 dhcp snooping verify mac-address

Defaults

Command Modes

Command History

To disable verify source mac-address against ipv6 DHCP packet mac address, use the no ipv6 dhcp snooping verify mac-addresscommand.

Disabled

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.

ip helper-address

Configures the destination broadcast address or the host address for DHCP server requests.

Syntax ip helper-address [vrf vrf-name] ip-address

Parameters

Default

Command Modes

Command History

To disable the destination broadcast address or the host address for DHCP server requests, use the ip helper-address [vrf vrf-name]ip-addresscommand.

vrf vrf-name	(Optional) Enter the keyword vrf and then the name of the
	VRF through which the host address can be reached.
ip-address	Enter an IP address through which the host address can be
	reached.
Disabled.
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.4. Introduced on the S-Series and Z-Series.

(0.0)

Dynamic Host Configuration Protocol (DHCP) 573