Command
Modes
CONFIGURATION (conf-frrp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
mode
Set the Master or Transit mode of the ring.
S6000
Syntax mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters master Enter the keyword master to set the Ring node to Master
mode.
transit Enter the keywordtransit to set the Ring node to Transit
mode.
Defaults Mode None
Command
Modes
CONFIGURATION (conf-frrp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
618 Force10 Resilient Ring Protocol (FRRP)