VersionDescription

7.7.1.0Introduced on the C-Series.

neighbor allowas-in

Set the number of times an AS number can occur in the AS path.

S6000

Syntaxneighbor {ip-address peer-group-name}allowas-innumber

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

To return to the default value, use the no neighbor {ip-addresspeer- group-name}allowas-incommand.

ip-address

(OPTIONAL) Enter the IP address of the neighbor in dotted

 

decimal format.

peer-group-

Enter the name of the peer group to set the advertisement

name

interval for all routers in the peer group.

number

Enter a number of times to allow this neighbor ID to use the

 

AS path. The range is from 1 to 10.

Not configured.

 

ROUTER BGP

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

You cannot set this configuration for a peer that is associated with a peer group. Similarly, you cannot associate a peer to a peer group if that peer is already configured with these settings.

bgp four-octet-as-support — enables 4-byte support for the BGP process.

Border Gateway Protocol

383

Page 383
Image 383
Dell 9.7(0.0) manual Neighbor allowas-in, VersionDescription