etheraddr <macaddr>
Assign the management port MAC address.
S6000
Syntax etheraddr <macaddr>
Parameters mac-address Enter a MAC address in standard format.
Command
Modes
BOOT_ADMIN
Command
History Version 9.0.2.0 Introduced on the S6000.
Usage
Information Use this command to assign a MAC address if FTOS cannot find a default MAC
address.
Example BOOT_ADMIN # etheraddr aa:aa:aa:aa:aa:aa
<Macaddr> XX:xx:xx:xx:xx:xx
No defaults for this
ignore enable-password
Reload the system software without the enable password configured.
S6000
Syntax ignore enable-password
Command
Modes
BOOT_USER
Command
History Version 9.0.2.0 Introduced on the S6000.
Usage
Information When you enter the reload command and the system reboots, you will not be
prompted for a password to enter the EXEC Privilege mode (normally you are
required to enter the enable command).
If your console or Telnet session expires after you used the ignore enable-
password command, you are prompted for an enable password when you re-
establish the session
328 Boot Command Line Interface