Dell 9.7(0.0) manual Ip pim dr-priority priority-value

Defaults

Command Modes

Command History

priority	(OPTIONAL) Enter the priority used in Bootstrap election
	process. The range is from zero (0) to 255. The default is
	zero (0).
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

6.1.1.0Added support for the VLAN interface.

ip pim dr-priority

Change the designated router (DR) priority for the interface.

Syntax ip pim dr-priority priority-value

Parameters

Defaults

Command Modes

Command History

To remove the DR priority value assigned, use the no ip pim dr-prioritycommand.

priority-valueEnter a number. Preference is given to larger/higher number. The range is from 0 to 4294967294. The default is 1.

1

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1192 PIM-Sparse Mode (PIM-SM)