Dell 9.7(0.0) manual Show ip igmp ssm-map, Show ip igmp vrf vrf-name ssm-map group, Group

show ip igmp ssm-map

Display is a list of groups that are currently in the IGMP group table and contain SSM mapped sources.

S6000

Syntax

Parameters

Command Modes

Command History

show ip igmp [vrf vrf-name] ssm-map [group]

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure this setting on that VRF.
	NOTE: Applies to specific VRF if input is provided, else
	applies to Default VRF.
group	(OPTIONAL) Enter the multicast group address in the form
	A.B.C.D to display the list of sources to which this group is
	mapped.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series and S-Series.

7.7.1.0Introduced on the E-Series.

Example	Dell#show ip igmp ssm-map
	Interface	Vlan 20
	Group	232.1.1.5
	Uptime	00:11:22
	Expires	Never
	Router mode	INCLUDE
	Last reporter	35.0.0.2
	Group source list	Expires
	Source address
	65.0.0.1	00:01:22
	65.0.0.2	00:01:22
	65.0.0.3	00:01:22
	65.0.0.4	00:01:22
	65.0.0.5	00:01:22

652 Internet Group Management Protocol (IGMP)