Dell 9.7(0.0) manual Password, Privilege level

Defaults

Command Modes

Command History

Usage Information

Related Commands

	available with the secret option only, and is the default
	encryption type for this option.
password	Enter a string up to 32 characters long.
privilege level	Enter the keyword privilege then a number from zero (0)
	to 15.
role role-name	Enter the keyword role followed by the role name to
	associate with that user ID.
secret	Enter the keyword secret then the encryption type.

The default encryption type for password option is 0. The default encryption type for secret option is 0. The default value of privilege level is 1.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.
9.5(0.0)	Added support for roles on the Z9000, S6000, S4820T,
	S4810, MXL.
9.2(1.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Added support for the secret option and the MD5 password encryption. Extended the name from 25 to 63 characters.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

To view the defined user names, use the show running-config user command.

password — specifies a password for users on terminal lines.

show running-config — views the current configuration.

1390 Security