Defaults

Command Modes

Command History

Usage Information

Related Commands

Range from 0 to 5.

none

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Added a warning message to the off-line diagnostic.

7.7.1.0Introduced on the S-Series.

You cannot enter this command on a Master or Standby unit.

The system reboots when the off-line diagnostics complete. This reboot is an automatic process. A warning message appears when the offline stack-unitcommand is implemented.

Warning - Diagnostic execution will cause stack-unit to reboot after completion of diags.

Proceed with Offline-Diags [confirm yes/no]:y

show environment (S-Series) — views the S-Series system component status (for example, temperature, voltage).

online stack-unit

Place a stack unit in the online state.

Syntax

online stack-unit number

Parameters

number

Enter the stack-unit number. The S6000 range is from 0 to 5.

 

Defaults

none

 

Debugging and Diagnostics

525

Page 525
Image 525
Dell 9.7(0.0) manual Proceed with Offline-Diags confirm yes/noy, Online stack-unit number, Defaults None