Dell 9.7(0.0) manual Show track, Ip route, Resolution, OutputDescription, Ip-address, IPv6

•track ip route reachability – configures object tracking on the reachability of an IPv4 route.

show track

Display information about tracked objects, including configuration, current tracked state (UP or DOWN), and the clients which are tracking an object.

Syntax

Parameters

Command Modes

Command History

Usage Information

show track [object-id[brief] interface [brief] [vrf vrf- name] ip route [brief] [vrf vrf-name] resolution vrf vrf- name [brief] brief]

object-id	(OPTIONAL) Display information on the specified tracked
	object. The range is 1 to 500.
interface	(OPTIONAL) Display information on all tracked interfaces
	(Layer 2 and IPv4 Layer 3).
ip route	(OPTIONAL) Display information on all tracked IPv4 routes.
resolution	(OPTIONAL) Display information on the configured
	resolution values used to scale protocol-specific route
	metrics. The range is 0 to 255.
brief	(OPTIONAL) Display a single line summary of the tracking
	information for a specified object, object type, or all tracked
	objects.
vrf vrf-name	(OPTIONAL) E-Series only: Display information on only the
	tracked objects that are members of the specified VRF
	instance. The maximum is 32 characters. If you do not enter
	a VRF name, information on the tracked objects from all
	VRFs displays.
EXEC Privilege
Version	Description
9.7(0.0)	Introduced on the S6000-ON.

8.3.12.0Introduced on the S4810.

8.4.1.0Introduced.

The following describes the show track command shown in the Example below.

OutputDescription

Track object-idDisplays the number of the tracked object.

Interface type Displays the interface type and slot/port number or address slot/port, IP route of the IPv4/IPv6 route that is being tracked.

ip-address, IPv6

Object Tracking 1043