privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.

enable restricted

Allows Dell Networking technical support to access restricted commands.

Syntax

enable restricted [encryption-type] password

To disallow access to restricted commands, use the no enable restricted command.

Parameters

Defaults

encryption- type

password

Not configured.

(OPTIONAL) Enter the number 7 as the encryption type.

Enter 7 followed a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router.

Use this parameter only with a password that you copied from the show running-configfile of another Dell Networking router.

Enter a text string, up to 32 characters long, as the clear text password.

Command History

Usage Information

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

Only Dell Networking Technical Support staff use this command.

Security

1379

Page 1379
Image 1379
Dell 9.7(0.0) manual Enable restricted encryption-type password, Encryption- type Password