Dell 9.7(0.0) Dot1x host-mode single-host multi-host multi-auth, Single-host, Multi-host

Related Commands

•dot1x auth-fail-vlan — Configure an authentication failure VLAN.

•dot1x reauthentication — Enable periodic re-authentication of the client.

•dot1x reauth-max —

Configure the maximum number of times to re-authenticate a port before it becomes unauthorized

dot1x host-mode

Enable single-host or multi-host authentication.

Syntax

Parameters

Defaults

Command Modes

Command History

Usage Information

dot1x host-mode {single-host multi-host multi-auth}

single-host	Enable single-host authentication.
multi-host	Enable multi-host authentication.
multi-auth	Enable multi-supplicant authentication.
single-host
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.4.1.0Added the multi-authoption on the C-Series and S- Series.

8.3.2.0Added the single-hostand multi-hostoptions on the C-Series, E-Series, and S-Series.

•Single-host mode authenticates only one host per authenticator port and drops all other traffic on the port.

•Multi-host mode authenticates the first host to respond to an Identity Request and then permits all other traffic on the port.

802.1X 167