Version Description
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information The following describes the show ip bgp next-hop command shown in the
following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next
hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Time Elapsed Displays the time elapsed since the next hop was learned. If
the route is down, this field displays time elapsed since the
route went down.
Example Dell# show ip bgp next-hop
Next-hop Resolved
172.16.0.2 YES
Dell#
show ip bgp paths
View all the BGP path attributes in the BGP database.
Syntax show ip bgp[vrf vrf-name] paths [regexp regular-expression]
Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf to view all path
attributes in the BGP database corresponding to that VRF.
NOTE: DescriptionYou can use this attribute to view
information on all path attributes in the BGP database
that correspond to either a default or a non-default VRF.
regexp regular-
expression
Enter a regular expression then use one or a combination of
the following characters to match:
442 Border Gateway Protocol