Dell 9.7(0.0) manual Area stub, Area area-id stub no-summary, No-summary

Defaults

Command Modes

Command History

Usage Information

Related Commands

Not configured.

ROUTER OSPF

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Added support for the Multi-Process OSPF.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

Only the routes within an area are summarized, and that summary is advertised to other areas by the ABR. External routes are not summarized.

area stub — creates a stub area.

router ospf — enters ROUTER OSPF mode to configure an OSPF instance.

area stub

Configure a stub area, which is an area not connected to other areas.

S6000

Syntax	area area-idstub [no-summary]
	To delete a stub area, use the no area area-id stub command.
Parameters	area-id	Specify the OSPF area in dotted decimal format (A.B.C.D.) or
		enter a number from zero (0) to 65535.
	no-summary	(OPTIONAL) Enter the keywords no-summaryto prevent the
		ABR from sending summary Link State Advertisements (LSAs)
		into the stub area.
Defaults	Disabled.

1062 Open Shortest Path First (OSPFv2 and OSPFv3)