Dell 9.7(0.0) manual Displaying All Output, Filtering the Command Output Multiple Times, Save

	show run	does not return the previous search result because it only
	grep	searches for instances containing a noncapitalized “ethernet”
	ethernet
	show run	returns instances containing both “Ethernet” and “ethernet”
	grep
	Ethernet
	ignore-case
no-more	does not paginate the display output
save	copies the output to a file for future use

Displaying All Output

To display the output all at once (not one screen at a time), use the no-moreoption after the pipe. This operation is similar to the terminal length screen-lengthcommand except that the no-moreoption affects the output of just the specified command. For example: Dell#show running-configno-more.

Filtering the Command Output Multiple Times

You can filter a single command output multiple times. To filter a command output multiple times, place the save option as the last filter. For example: Dell# command grep regular-expression

except regular-expression grep other-regular-expression find regular- expression no-more save.

Enabling Software Features on Devices Using a Command Option

This capability to activate software applications or components on a device using a command is supported on the S4810, S4820T, and S6000, platforms.

Starting with Release 9.4(0.0), you can enable or disable specific software functionalities or applications that need to run on a device by using a command attribute in the CLI interface. This capability enables effective, streamlined management and administration of applications and utilities that run on a device. You can employ this capability to perform an on-demand activation or turn-off of a software component or protocol. A feature configuration file that is generated for each image contains feature names denotes whether this enabling or disabling method is available for such features. In 9.4(0.0), you can enable or disable the VRF application globally across the system by using this capability.

You can activate VRF application on a device by using the feature vrf command in CONFIGURATION mode.

NOTE: The no feature vrf command is not supported on any of the platforms.

To enable the VRF feature and cause all VRF-related commands to be available or viewable in the CLI interface, use the following command. You must enable the VRF feature before you can configure its related attributes.

Dell(conf)# feature vrf

CLI Basics 47