Dell 9.7(0.0) - page 614

Parameters event Enter the keyword event to display debug information
related to ring protocol transitions.
packet Enter the keyword packet to display brief debug
information related to control packets.
detail Enter the keyword detail to display detailed debug
information related to the entire ring protocol packets.
ring-id (Optional) Enter the ring identification number. The range is
from 1 to 255.
count number Enter the keyword count then the number of debug
outputs. The range is from 1 to 65534.
Defaults Disabled.
Command
Modes
CONFIGURATION (conf-frrp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage
Information
Because the resilient ring protocol can potentially transmit 20 packets per
interface, restrict debug information.
description
Enter an identifying description of the ring.
S6000
Syntax description Word
To remove the ring description, use the no description [Word] command.
614 Force10 Resilient Ring Protocol (FRRP)