Dell 9.7(0.0) manual Debug frrp, Command History Usage Information Example Related Commands

Command History

Usage Information

Example

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series.

7.5.1.0Introduced.

Executing this command without the optional ring-idcommand clears the statistics counters on all the available rings. Dell Networking OS requires a command line confirmation before the command executes. This command clears the following counters:

•hello Rx and Tx counters

•Topology change Rx and Tx counters

•The number of state change counters

Dell#clear frrp

Clear frrp statistics counter on all ring [confirm] yes

Dell#clear frrp 4

Clear frrp statistics counter for ring 4 [confirm] yes

Dell#

show frrp — displays the Resilient Ring Protocol configuration.

debug frrp

Clear the FRRP statistics counters.

S6000

Syntaxdebug frrp {event packet detail} [ring-id] [count number]

To disable debugging, use the no debug frrp {event packet detail} {ring-id} [countnumber] command.

Force10 Resilient Ring Protocol (FRRP) 613