Dell 9.7(0.0) manual Ip ssh hostbased-authentication enable

ip ssh hostbased-authentication

Enable hostbased-authentication for the SSHv2 server.

Syntax ip ssh hostbased-authentication enable

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication enable command.

enable	Enter the keyword enable to enable hostbased-
	authentication for SSHv2 server.
Disabled.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

If you enable this command, clients can log in without a password prompt. This command provides two levels of authentication:

•rhost-authentication is done with the file specified in the ip ssh rhostfile command.

•checking client host-keys is done with the file specified in the ip ssh pub- key-filecommand.

NOTE: Administrators must specify the two files (rhosts and pub-key-file) to configure host-based authentication.

ip ssh pub-key-file — public keys of trusted hosts from a file.

ip ssh rhostsfile — trusted hosts and users for rhost authentication.

1426 Security