Dell 9.7(0.0) manual Trusted-port, Syntaxtrusted-port

trusted-port

Allow bypassing the configured RA guard validation and forwards the RA packets received on the interface, which has the trusted port policy attached.

Syntaxtrusted-port

Defaults

Command

Modes

Command

History

Usage

Information

Related

Commands

To reset the policy applied to the trusted port, use the no trusted-portcommand.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

Use this command to disable all the RA guard policies.

•ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the router advertisement (RA) guard policy name and enter the RA guard policy configuration mode.

1038 Neighbor Discovery Protocol (NDP)