Dell 9.7(0.0) manual Ip igmp snooping flood

Version	Description
9.0.2.0	Introduced on the S6000.
8.3.19.0	Introduced on the S4820T.
8.3.11.1	Introduced on the Z9000.
8.3.7.0	Introduced on the S4810.
7.6.1.0	Introduced on the S-Series.
7.5.1.0	Introduced on the C-Series.
E-Series legacy
command.

Usage	Queriers normally send some queries when a leave message is received prior to
Information	deleting a group from the membership database. There may be situations when
	you require a fast deletion of a group. When you enable IGMP fast leave
	processing, the switch removes an interface from the multicast group as soon as it
	detects an IGMP version 2 leave message on the interface.

ip igmp snooping flood

This command controls the flooding behavior of unregistered multicast data packets.

Syntax	ip igmp snooping flood
	To undo this configuration, use the no ip igmp snooping flood command.
Defaults	Enabled.
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.
	Version	Description
	9.7(0.0)	Introduced on the S6000-ON.
	9.5(0.0)	Introduced on the Z9500.
	9.0.2.0	Introduced on the S6000.
	8.3.19.0	Introduced on the S4820T.
	8.3.11.1	Introduced on the Z9000.
	8.3.7.0	Introduced on the S4810.
	8.2.1.0	Introduced on the C-Seris and S-Series.
	7.7.1.0	Introduced on the E-Series.

Internet Group Management Protocol (IGMP) 657