Dell 9.7(0.0) manual Command Modes Command History Usage Information, Version Description 70.0

Command Modes

Command History

Usage Information

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced the support for bmp-booton the S-Series and
	Z-Series switches.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

To display these changes in the show bootvar command output, save the running configuration to the startup configuration (using the copy command) and reload system.

The keyword bmp-bootis used only when the device boots up from BMP. In case of industrial standard upgraded device, the Dell networking OS stores the image partition upgraded from the DHCP offer in bmp-bootvariable.

cd

Change to a different working directory.
Syntax	cd directory
Parameters	directory	(OPTIONAL) Enter one of the following:
		• flash: (internal Flash) or any sub-directory
		• nfsmount://<mount-point>/filepath: NFS
		mounted path
		NOTE: While switching to a remote NFS file system, it
		is mandatory to specify the mount-point that
		indicates the working directory on the NFS file
		system. You cannot enter the root directory of the
		remote NFS file system.
		• usbflash: (internal Flash) or any sub-directory
Command	EXEC Privilege
Modes

File Management 59