Dell 9.7(0.0) manual Show bootvar, Show file-systems, Syntax Command Modes Command History Example

show bootvar

Display the variable settings for the boot parameters.

Syntax

Command Modes

Command History

Example

show bootvar

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.4Output expanded to display current reload mode (normal or Jumpstart).

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.5.1.0Introduced on the C-Series.

E-SeriesOriginal command.

Dell#show bootvar

PRIMARY IMAGE FILE = system://B

SECONDARY IMAGE FILE = tftp://10.16.127.35/Dell-SI-9-0-2-0.bin DEFAULT IMAGE FILE = system://A

LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist SECONDARY NETWORK CONFIG FILE = variable does not exist CURRENT IMAGE FILE = system://B

CURRENT CONFIG FILE 1 = flash://startup-config CURRENT CONFIG FILE 2 = variable does not exist CONFIG LOAD PREFERENCE = local first

BOOT INTERFACE GATEWAY IP ADDRESS = 10.16.132.254 Reload Mode = normal-reload

Dell#

show file-systems

Display information about the file systems on the system.

Syntax show file-systems

74 File Management