Usage Information

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.1.0Add the DSCP value for ACL matching.

8.2.1.0Allows ACL control of fragmented packets for IP (Layer 3) ACLs.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

7.4.1.0Added support for the non-contiguous mask and added the monitor option. Deprecated the keyword established.

6.5.10Expanded to include the optional QoS order priority for the ACL entry.

The monitor option is relevant in the context of flow-based monitoring only. For more information, refer to Port Monitoring.

The order option is relevant in the context of the Policy QoS feature only. The following applies:

•The seq sequence-numbercommand is applicable only in an ACL group.

•The order option works across ACL groups that are applied on an interface via the QoS policy framework.

•The order option takes precedence over seq sequence-number.

•If you do not configure sequence-number, the rules with the same order value are ordered according to their configuration order.

•If you configure sequence-number, the sequence-number is used as a tie breaker for rules with the same order.

When you use the log option, the CP processor logs details about the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets’ details.

If you configure the sequence-number, the sequence-numberis used as a tie breaker for rules with the same order.

NOTE: When you configure ACL logging and byte counters simultaneously, byte counters may display an incorrect value. Configure packet counters with logging instead.

220

Access Control Lists (ACL)

Page 220
Image 220
Dell 9.7(0.0) manual Access Control Lists ACL